Empura EGF-40/50_NAT Natural Gas 15.5" Commercial Gas Fryer with 40 lb Capacity, 90,000 BTU
|Ship Weight||157 lbs.|
|Manufacturer Part #||EGF-40/50_NAT|
|Fryer Controller Type||Thermostatic|
|Dimensions (HxWxD)||39.36" x 15.5" x 30.32"|
|Number of Tanks||1|
|Number of Tubes||3|
|Oil Capacity||40 LB|
|Gas Type||Natural Gas|
|Temperature||200°F - 400°F|
The Empura EGF-40/50_NAT is a floor standing Gas powered Fryer. This model runs on Natural Gas. The unit has an 40 lb cooking oil capacity with a stainless steel tank. The front and door of the fryer are stainless steel while the sides and back are galvanized steel.
The unit is controlled by a prompt response thermostat and has a high heat (450 degrees F) shut off feature, for safety and peace of mind. The temperature range for the fryer is 200-400 degrees Fahrenheit.
The EGF-40/50_NAT has 3 cast-iron vertical burner tubes with an output of 90,000 BTU total.
This Empura EGF-40/50_NAT fryer model comes with a stainless steel heat exchanger with baffle, 6" stainless steel adjustable legs, and two fry baskets.
The fryer is ETL listed.
Empura EGF-40/50_NAT Features
- Floor standing
- Natural Gas powered
- 40 lb capacity
- Stainless steel Front, Door, Top, Ledge, and Header
- Galvanized steel Sides and Back
- Thermostatically controlled - Prompt Response for fast temp recovery
- Snap action millivolt control valve
- Temp range: 200 - 400 Degrees Fahrenheit
- Open Stainless steel Fry Pot Tank with Cold Zone
- 3 Cast Iron Vertical Burner Tubes
- Includes 2 baskets
- Stainless steel hanger plate included
- Built-in Stainless Steel heat exchanger with baffle
- 6" Stainless Steel Adjustable Legs
- 1/2" NPT rear gas connection
- 90,000 BTU total
- Automatic safety shut off
- 450 degrees F High Limit for Safety
- 1-1/4" Full Port Drain Valve
- ETL listed
- Note: Gas Regulator Not Included