Everest Refrigeration ETR1-24 35.375 Inch One Section Side Mount Compact Undercounter Refrigerator 6 Cubic Feet
Ship Weight | 146 lbs |
Manufacturer | Everest Refrigeration |
Model Number | ETR1-24 |
Manufacturer Part # | ETR1-24 |
Oversized Shipping | No |
Hazardous Material | No |
Top/Sides/Interior Material | Stainless Steel |
Bottom/Rear Material | Galvanized Steel |
Color | Silver |
Dimensions (W x D x H) | 35-3/8" x 23-5/8" x 29-1/4" |
Capacity | 6 Cu. Ft. |
Compressor Location | Side Mounted |
Door Style | Swing |
Door Type | Solid |
Number of Sections | 1 |
Number of Doors | 1 |
Number of Shelves | 2 |
Horsepower | 1/4+ |
Amps | 3.5 |
Electrical | 115v/60/1ph |
Temperature Range | 33° - 54°F |
Factory Preset Temp | 35°F |
Insulation Thickness | 2.5" |
Refrigerant | R290 Hydrocarbon |
NSF Listed | Yes |
ETL Sanitation | Yes |
The Everest Refrigeration ETR1-24 is an Undercounter Refrigerator with a Side Mounted Condensing Unit. The worktop on this refrigerator is constructed of 16 gauge stainless steel, while the interior and sides are also made of stainless steel. The rear and bottom are constructed of galvanized steel. The Blizzard R290 condensing unit is replaceable, doesn't require on-site brazing and features reverse fan motors which support condenser coil cleaning. The ETR1-24 utilizes environmentally friendly refrigerant R290. There is also energy efficient and shatter proof lighting, providing high color illumination with low heat output.
The defrost cycle is both time-initiated and temperature terminated, and uses a defrost heater. This product's evaporator coils are corrosion resistant. The condensate drain is self-maintaining, and will not require any external drains. In addition, the drain is energy efficient, it won't need any electric heaters either. Pressure relief devices allow for easy access to the interior after opening the door. The factory preset temperature is 35°F. Temperatures can range from 33°F to 54°F.
The door gasket is snap-in and magnetic. The high strength door handles are recessed. There are four 5" swivel casters, with locks on the front set. The self-closing adjustable torsion system offers a positive seal. Meanwhile, the interior features two epoxy-coated steel wire shelves per section. The cabinet and door are insulated with high-density polyurethane. The included NEMA 5-15P is pre-wired and ready to plug.
Everest Refrigeration ETR1-24 Features
- 1 Self-Closing Solid Hinged Door
- Side Mounted Condensing Unit
- Refrigerant: R290
- Capacity: 6 Cubic Feet
- Blizzard All-In-One Slide Out Cooling Cartridge
- Top, Sides, and Interior Material: Stainless Steel (16 Gauge Worktop)
- Bottom and Rear Material: Galvanized Steel
- Multi-Function Digital Controller
- 2-1/2" Polyurethane Insulated Cabinet
- (4) 5" Swivel Casters with Locks on front set
- High Performance Condenser Fans
- Frame Heaters
- Rounded Corners
- Silicone Coated Shatter Proof Lighting
- Electronically Commutated (ECM) Fan Motors
- Pre-Installed Locks
- Full-Length Air Duct System
- Overheat Protection Alarm
- Temperature Range: 33°F to 54°F
- NEMA 5-15P
- NSF Listed
- ETL Listed
- Electric: 115v/60/1ph
Everest Refrigeration ETR1-24 Benefits
- Plug is pre-wired and ready for use
- Slide out cooling cartridge is quick, safe, and eliminates the risk of coolant ignition
- Frame heaters prevent moisture buildup on exterior
- Digital controller features an easy to read LED display
- ECM motors achieve rapid cooling with less consumption
- Rounded corners reduce hazards
Overall Dimensions:
Height: 29-1/4"
Width: 35-5/8"
Depth: 23-5/8"



