Everest Refrigeration ETBF1 27.75 Inch One Section Back Mount Undercounter Freezer 7.5 Cubic Feet

The Everest Refrigeration ETBF1 is an Undercounter Freezer with a Back Mounted Condensing Unit. The worktop on this freezer is constructed of 16 gauge stainless steel, while the interior and sides are also made of stainless steel. The rear and bottom are constructed of galvanized steel. The Blizzard R290 condensing unit is replaceable, doesn't require on-site brazing and features reverse fan motors which support condenser coil cleaning. The ETBF1 utilizes environmentally friendly refrigerant R290.

The defrost cycle is both time-initiated and temperature terminated, and uses a defrost heater. This product's evaporator coils are corrosion resistant. The condensate drain is self-maintaining, and will not require any external drains. In addition, the drain is energy efficient, it won't need any electric heaters either. Pressure relief devices allow for easy access to the interior after opening the door. The factory preset temperature is -4°F. Temperatures can range from -10°F to 54°F.

The door gasket is snap-in and magnetic. The high strength door handles are recessed. There are four 5" swivel casters, with locks on the front set. The self-closing adjustable torsion system offers a positive seal. Meanwhile, the interior features two epoxy-coated steel wire shelves per section. The cabinet and door are insulated with high-density polyurethane. The included NEMA 5-15P is pre-wired and ready to plug.

Everest Refrigeration ETBF1 Features

• 1 Self-Closing Solid Hinged Door
• Rear Mounted Condensing Unit
• Refrigerant: R290
• Capacity: 7.5 Cubic Feet
• Blizzard All-In-One Slide Out Cooling Cartridge
• Top, Sides, and Interior Material: Stainless Steel (16 Gauge Worktop)
• Bottom and Rear Material: Galvanized Steel
• Multi-Function Digital Controller
• 2-1/2" Polyurethane Insulated Cabinet
• (4) 5" Swivel Casters with Locks on front set
• High Performance Condenser Fans
• Frame Heaters
• Rounded Corners
• Front Air Breathing
• Pre-Installed Locks
• Full-Length Air Duct System
• Overheat Protection Alarm
• Temperature Range: -10°F to 54°F
• NEMA 5-15P
• NSF Listed
• ETL
• Electric: 115v/60/1ph

Everest Refrigeration ETBF1 Benefits

• Plug is pre-wired and ready for use
• Frame heaters prevent moisture buildup on exterior
• Slide out cooling cartridge is quick, safe, and eliminates the risk of coolant ignition
• Digital controller features an easy to read LED display
• Front-air breathing allows for flexible installation
• Rounded corners reduce hazards

Overall Dimensions:
Height: 30-1/4"
Width: 27-3/4"
Depth: 31-1/2"