Many Empura, Ice-O-Matic, Scotsman, and Dispense-Rite Products Now In Stock!

Carter-Hoffmann BR120 EnduraHeat Heat Retention Series 69 3/4" Tall x 57 5/8" Wide 2-Door 120-Plate Capacity Insulated Stainless Steel Mobile Heated Banquet Cabinet For Plates Up To 11" Diameter, 120V 1950 Watts

Specification Specifications
Ship Weight 602 lb
Manufacturer Carter-Hoffmann
Model Number BR120
Manufacturer Part # BR120
Hazardous Material No
Oversized Shipping No
Type Banquet Cabinets
Height 69 3/4 Inches
Width 57 5/8 Inches
Depth 32 1/2 Inches
Base Material Stainless Steel
Color Silver
Cabinet Type Heated, Insulated
Covered 10 1/2" Diameter Plate Capacity 120
Insulation Type High-Density Fiberglass
Door Type 2 Solid Doors
Shelf Type Removable Welded Nickel-Plated Wire
Number Of Shelves 3
Heating Type Convection Heating System
Controls 3-Way Toggle Switch (Off / Convection / Enduraheat)
Temperature Range 80 to 200 Degrees F
Made In USA Yes
UL Listed Yes
NSF Listed Yes
UL EPH Classified Yes
Number Of Plates / Plate Carriers Included None
Power Electric
Voltage 120
Hertz 60
Phase 1
Amps 15.3
Watts 1950
Power Cord Length 10 ft
Plug NEMA 5-20P
Casters 6" Balloon Casters (2 With Brakes)
Corner Bumper Type Non-Marking Gray Vinyl Bumper
Brand Line EnduraHeat Series
View all Specifications

There are 3 welded, double nickel-plated removable wire shelves inside this banquet cabinet. There is a convection heating system on this mobile banquet cabinet that operates with a 3-way toggle switch (Off / Convection / Enduraheat) and temperatures can be set between 80 to 200 degrees F and the unit does not come included with plate carriers that are available separately.

The EnduraHeat system uses patented technology to provide heat without any electrical connection or canned fuel. Once the system is charged for 1 hour, load up your prepared, coved plates and keep them warm and ready to serve for up to 2 more hours.

The all-welded stainless steel construction of the EnduraHeat mobile banquet cabinet features turned-in seams for improved support and durability. There is 2" thick high-density fiberglass insulation on this mobile banquet cabinet.

The Carter-Hoffmann BR120 EnduraHeat mobile banquet cabinet is an electric unit that operates at 120 Volts, 60 Hertz, 1-phase, and 15.3 Amps for 1950 Watts of power. The unit comes with a 10 ft power cord with a standard NEMA 5-20P plug. It is recommended that this unit be connected to a dedicated and protected circuit.

This mobile banquet cabinet rolls on a set of 6" balloon casters in an offset "wheel-ahead" pattern for a smooth ride, and 2 of the casters have brakes. There are non-marking gray vinyl corner bumpers mounted at the base of this mobile banquet cabinet.

This mobile banquet cabinet is proudly made in the USA, NSF listed, UL EPH Classified, and UL listed in the United States and Canada for safety.

The BR120 is the EnduraHeat Heat Retention series 69 3/4" Tall x 57 5/8" Wide mobile banquet cabinet from Carter-Hoffmann with 2 solid doors for pre-plated food that will hold up to 120 covered plates that are 8 3/4" to 11" diameter in a durable stainless steel unit. There is a horizontal full-width heavy-duty stainless steel push handle bolted on each end of this banquet cabinet with reinforced backup plates.

Carter-Hoffmann BR120 Features

  • EnduraHeat Heat Retention series mobile banquet cabinet
  • Cabinet Size: 69 3/4" Tall x 57 5/8" Wide
  • Material: Stainless steel
  • Covered 8 3/4" to 11" Diameter Plate Capacity: 120
  • Door Type: 2 solid doors
  • Insulation: 2" thick high-density fiberglass
  • Heating Type: Convection heating system
  • Shelf Type: Removable welded duplex nickel-plated wire shelves
  • Number of Shelves: 3
  • Control Type: 3-way toggle switch (Off / Convection / Enduraheat)
  • Plate carriers not included
  • Temperature Range: 80 to 200 degrees F
  • 10 ft power cord
  • Electrical specifications: 120 Volts, 60 Hertz, 1-phase, and 15.3 Amps for 1950 Watts, NEMA 5-20P plug
  • 2 horizontal full-width heavy-duty stainless steel push handles (1 on each end) with reinforced backup plates
  • UL EPH Classified
  • UL listed in the United States and Canada
  • Made in the USA
  • NSF Listed
  • Non-marking gray vinyl corner bumpers
  • 6" balloon casters (2 with brakes)

Carter-Hoffmann BR120 Benefits

  • Patented EnduraHeat heat retention system holds plates warm for 2 hours without electric connection or fuel cans
  • Turned-in seams for improved support and durability
  • "Wheel-ahead" caster design for a smooth ride
  • Strong all-welded double-wall insulated stainless steel construction

Overall Dimensions:
Height: 69 3/4"
Width: 57 5/8"
Depth: 32 1/2"

View all Description
Because this item is not stocked in our warehouse, processing, transit times and stock availability will vary. If you need your items by a certain date, please contact us prior to placing your order. Expedited shipping availability may vary. We cannot guarantee that this item can be cancelled off of the order or returned once it is placed.
NSF Listed
NSF Listed
This item meets the standards imposed by NSF International, which focuses on public safety, health, and the environment.
Made In America
Made In America
This item was made in the United States of America.
UL Listed
UL Listed
This item has been tested and meets safety standards imposed by the Underwriters Laboratories (UL).
NEMA 5-20P plugs
NEMA 5-20P plugs
This unit comes with a NEMA 5-20P plug.
Not For Residential Use
Not For Residential Use
Installed in a non-commercial setting will void your homeowner's insurance and the equipment manufacturer's warranty.
Free Shipping
Add this item to the cart to calculate your shipping rate
Lead time varies; contact our team with your ZIP code for more info.
  • All-welded insulated stainless steel construction
  • Removable welded nickel-plated shelves
  • EnduraHeat Heat Retention series mobile banquet cabinet
  • Cabinet Size: 69 3/4" Tall x 57 5/8" Wide
  • Covered Plate Capacity: 120
  • High-density fiberglass insulation
  • 120 Volts, 1950 Watts, NEMA 5-20P plug
  • 2 solid doors
  • Convection heating system
  • Turned-in seams for improved support and durability
  • Heavy-duty stainless steel push handles
  • UL EPH Classified & UL Listed
  • NSF Listed
  • Made in the USA
  • "Wheel-ahead" caster design
  • Warranty Info
    1 Year Parts and Labor
    Other Available Sizes
    Other Products from this Line